From Wikipedia, the free encyclopedia
| Alexander Lippisch | |
|---|---|
| Born | November 2, 1894 Munich, German Empire |
| Died | February 11, 1976 (aged 81) Cedar Rapids, Iowa, USA |
| Nationality | German |
| Engineering career | |
| Significant projects | Messerschmitt Me 163 |
| Significant advance | first delta wing to fly first mass-produced rocket fighter |
Lippisch was born in Munich, Kingdom of Bavaria. He later recalled that his interest in aviation stemmed from a demonstration conducted by Orville Wright, over Tempelhof Field in Berlin, in September 1909.[1] Nonetheless, he planned to follow his father’s footsteps into art school. The outbreak of World War I intervened. During his service with the German Army from 1915–1918, Lippisch had the chance to fly as an aerial photographer and mapper.
Contents
Tailless aircraft
Following the war, Lippisch worked with the Zeppelin Company, and it was at this time that he first became interested in tail-less aircraft. In 1921 his first such design would reach production in as the Lippisch-Espenlaub E-2 glider, built by Gottlob Espenlaub. This was the beginning of a research programme that would result in some fifty designs throughout the 1920s and 1930s. Lippisch’s growing reputation saw him appointed the director of the Rhön-Rossitten Gesellschaft (RRG), a glider research group.Lippisch’s work led to a series of tail-less designs numbered Storch I – Storch IX (Stork I-IX) between 1927 and 1933 (these were not related to the successful Fieseler Fi 156 Storch STOL aircraft of World War II). These designs attracted little interest from the government and private industry. Nonetheless, it was during this time that Lippisch’s Ente (Duck) became the first aircraft to fly under rocket power.
Experience with the Storch series led Lippisch to concentrate increasingly on delta-winged designs. The Delta I was the world's first[2] tailless delta wing aircraft to actually fly (in 1931[3][4]). This interest resulted in five aircraft, numbered Delta I – Delta V, which were built between 1931 and 1939.[4] In 1933, RGG had been reorganised into the Deutsche Forschungsanstalt für Segelflug (German Institute for Sailplane Flight, DFS) and the Delta IV and Delta V were designated as the DFS 39 and DFS 40 respectively.
War projects
In early 1939, the Reichsluftfahrtsministerium (RLM, Reich Aviation Ministry) transferred Lippisch and his team to work at the Messerschmitt factory, in order to design a high-speed fighter aircraft around the rocket engines[3] then under development by Hellmuth Walter. The team quickly adapted their most recent design, the DFS 194, to rocket power, the first example successfully flying in early 1940. This was the direct ancestor of what would become the Messerschmitt Me 163 Komet.Although technically novel, the Komet did not prove to be a successful weapon, and friction between Lippisch and Messerschmitt was frequent. In 1943, Lippisch transferred to Vienna’s Aeronautical Research Institute (Luftfahrtforschungsanstalt Wien, LFW), to concentrate on the problems of high-speed flight.[3] That same year, he was awarded a doctoral degree in engineering by the University of Heidelberg.
Wind tunnel research in 1939 had suggested that the delta wing was a good choice for supersonic flight, and Lippisch set to work designing a supersonic, ramjet-powered fighter, the Lippisch P.13a (wartime test footage). By the time the war ended, however, the project had only advanced as far as a development glider, the DM-1.
Post war in the United States
Like many German scientists, Lippisch was taken to the United States after the war under Operation Paperclip. Advances in jet engine design were making Lippisch's ideas more practical, and Convair became interested in a hybrid (mixed power) jet/rocket design which they proposed as the F-92. In order to gain experience with the delta wing handling at high speeds, they first built a test aircraft, the 7002, which became the first jet-powered delta-wing aircraft to fly on June 9, 1948.[5] Although the U.S. Air Force lost interest in the F-92, the next test model 7003 was designated the XF-92A. This led Convair to proposing delta wing for most of their projects through the 1950s and into the 1960s, including the F-102 Delta Dagger, F-106 Delta Dart and B-58 Hustler.Ground Effect
From 1950–1964, Lippisch worked for the Collins Radio Company in Cedar Rapids, Iowa, which had an aeronautical division.[3] It was during this time that his interest shifted toward ground effect craft. The results were an unconventional VTOL aircraft (an aerodyne) and an aerofoil boat research seaplane X-112, flown in 1963. However, Lippisch contracted cancer, and resigned from Collins.When he recovered in 1966, he formed his own research company, Lippisch Research Corporation, and attracted the interest of the West German government. Prototypes for both the aerodyne and the ground-effect craft RFB X-113 (1970) then RFB X-114 (1977) were built, but no further development was undertaken. The Kiekhaefer Mercury company was also interested in his ground-effect craft and successfully tested one of his designs as the Aeroskimmer, but also eventually lost interest.
Lippisch died in Cedar Rapids on February 11, 1976.[3]
Some Lippisch designs
- Lippisch SG-38 Zögling, 1926
- Lippisch P.01-111, designed as a competitor[citation needed] to the Messerschmitt Me-163 Komet
- Lippisch Li P.04, a tailless airplane designed as a competitor to the Messerschmitt Me 329
- Lippisch Li P.10, 1942 tailess bomber design
- Lippisch P.11, designed to compete with the Horten Ho-IX; the latter went on to become the Horten (Gotha) Ho-(Go-)229.
- Lippisch Li P.13, 1943 push-pull bomber design
- Lippisch P.13a, a unique delta-winged, ramjet-powered interceptor.
- Lippisch P.13b, a unique airplane powered by a rotating fuel-table of lignite, owing to the fuel shortages late in World War 2 in Germany.
- Lippisch P.15, a development of the Messerschmitt Me-163 Komet.
- Dornier Aerodyne, a 1972 VTOL testbed
No comments:
Post a Comment